ALCON HYPER-RTV GASKET MAKER (MSDS)

ALCON HYPER RTV NEUTRAL LIQUID GASKET MAKER (TDS)

ALCON HYPER-RTV NEUTRAL GRAY LIQUID GASKET 85 GR.

Neutral oxime-based next-generation liquid gasket.

• Does not emit any odor that could negatively affect sensors during curing.
• Resistant to shrinkage and cracking caused by thermal cycling.
• Operates between -60 °C and +300 °C after curing is complete.
• Specifically formulated for oily and dirty surfaces.
• Resistant to oil, antifreeze, gasoline, diesel, and seawater after curing.
• Removable when necessary.
• Offers strong adhesion, coverage, continuous elasticity, and enhanced sealing.

Technical Information

• Colors: Red, Black, Gray
• Curing: Neutral Oxime
• Elongation at Break: 22
• Viscosity/Appearance: Thixotropic paste
• Density: 1.05 g/cm³
• Elasticity: 450%
• Initial Surface Film Formation Time: 15 minutes (at +23 °C)
• Curing Speed: 3 mm/day
• Temperature Resistance: -60 °C to +300 °C
• Extrusion Rate: 220 g/min
• Application Surface Temperature: +5 °C to +40 °C

Application Instructions

Surface Preparation

• Clean dust, oil, and dirt from surfaces that will come into contact with the liquid gasket.
• If there are any remnants of previously applied gaskets, remove them using mechanical methods.

Application Method

• Apply the liquid gasket to one surface only. Wait 5-10 minutes, then join the parts.
• For small gasket surfaces, the parts can be joined immediately if necessary.
• After use, do not leave the tube open.

Application Areas

• For sealing all surfaces requiring gaskets and filling corrosion gaps.
• In automobiles, trucks, buses, military vehicles, ships, machinery, heating systems, industrial furnaces, and chimneys.
• For sealing delicate surfaces exposed to high temperatures or temperature fluctuations.
• On surfaces where rubber, cork, or Klingrit-type gaskets cannot be applied.
• In all engine gasket areas, differential covers, carburetor covers, pumps, thermostats, gear and transmission boxes, and other vibration- and heat-exposed surfaces.

Warnings

• Keep out of reach of children.
• Avoid contact with eyes and skin.
• In case of eye contact, rinse immediately with plenty of water and seek medical attention.
• Wear appropriate protective clothing, gloves, goggles, or a mask when working.
• In case of an accident or if you feel unwell, seek medical advice immediately.
• If swallowed, contact a doctor immediately and show the container or label.
• Do not pour into sewage systems. Dispose of waste and containers according to local hazardous or special waste disposal regulations.