ALCON SMOKE DETECTOR TEST SPRAY (MSDS)  
 

ALCON SMOKE DETECTOR SPRAY (TDS) 
 

ALCON Smoke Detector Spray 400 ml

ALCON Smoke Detector Spray is designed for both professional businesses and private use, serving as an easy and reliable tool for testing the functionality of fire detection and suppression systems. It evaporates without leaving residues, ensuring the detector remains clean.

Key Features

• Fast Acting: Quickly activates the smoke detection system.
• Non-Corrosive: Does not cause corrosion or damage to detectors.
• Extended Nozzle Life: Durable nozzle for multiple uses.
• Easy Application: Simple and straightforward to use.

Technical Information

• Chemical Composition: Aerosol
• Appearance: Clear
• Odor: Sweet Petroleum
• Boiling Range (Aerosol): -25.1 - +32ºF
• Evaporation Rate (Aerosol): Immediate above -25.1°F
• Vapor Density (Aerosol): Heavier than air
• Volatile Content (Aerosol): < 100%

Application Method

1. Shake the can before use.
2. Spray from approximately 25-30 cm away at room temperature. The alarm should activate within 15-20 seconds.
3. If the alarm does not trigger, check the batteries in the detector or device.

Warnings

• Do not spray near open flames or hot surfaces.
• Do not puncture or throw the can into fire.
• The can is pressurized; keep away from sunlight and store at temperatures below +50°C.
• Do not inhale the aerosol.
• Avoid eye contact; if contact occurs, rinse immediately with plenty of water and seek medical attention.
• Use protective clothing, gloves, and goggles while applying.
• Only use in well-ventilated areas.
• Keep away from ignition sources; do not smoke during application.