ALCON WORLD ACETOXY LIQUID GASKET MAKER (MSDS)

WORLD ACETOXY (TDS)

ALCON WORLD ACETOXY RED LIQUID GASKET 50 GR

Description:
Acetoxy-based, powerful new liquid gasket.

• Emits acetic acid odor during curing.
• Resistant to shrinkage and cracking caused by thermal cycling.
• Operates between -40°C and +300°C after curing.
• Resistant to oil, antifreeze, gasoline, diesel, and seawater once cured.
• Removable when necessary.
• Offers strong adhesion, coverage, continuous elasticity, and enhanced sealing.

Technical Specifications:

• Colors: Red, Black, Gray
• Curing: Single-component Acetoxy
• Shore A Hardness: 22
• Viscosity/Appearance: Thixotropic paste
• Density: 1.05 g/cm³
• Elongation at Break: 320%
• Initial Film Formation Time: 15 minutes (at +23°C)
• Curing Speed: 3-4 mm/day
• Movement Capability: 10%
• Service Temperature: -40°C to +300°C
• Flow Rate: 220 g/minute
• Application Surface Temperature: +5°C to +40°C

Application Instructions:

1. Surface Preparation:
   • Clean dust, oil, and dirt from surfaces that will contact the liquid gasket.
   • Remove old gasket residues using mechanical methods.
2. Application Method:
   • Apply the liquid gasket to one surface only. Wait 5-10 minutes before joining parts.
   • For small gasket areas, parts can be joined immediately if needed.
   • Close the tube tightly after use to avoid drying.

Applications:

• Suitable for all surfaces requiring gasketing and filling corrosion gaps.
• Used in automobiles, trucks, buses, military vehicles, ships, machinery, heating systems, industrial furnaces, and chimneys.
• Ideal for sealing high-temperature or temperature-sensitive surfaces and for areas exposed to vibration and heat, such as engine parts, differential covers, carburetor caps, pumps, thermostats, gearboxes, and transmissions.
• Not suitable for sensitive metals like copper and brass during curing due to acetic acid release.
• Not recommended for PE, PP, PTFE, neoprene, and bitumen surfaces.
• Not paintable.

Warnings:

• Contains trace amounts of volatile chemicals. Releases unpleasant odors and acetic acid during curing. Avoid prolonged inhalation. Ensure adequate ventilation in enclosed spaces.
• Avoid prolonged contact with wet silicone; hardened silicone poses no health risks.
• Do not burn the full/empty package. Store away from sunlight at temperatures below +50°C.
• Keep out of reach of children.
• Store in a well-ventilated area.
• Keep away from ignition sources; no smoking.
• Avoid contact with eyes and skin.
• In case of eye contact, rinse immediately with plenty of water and seek medical attention.
• Use appropriate protective clothing, gloves, and goggles/masks during handling.
• If swallowed, seek immediate medical attention and show the container or label.
• Do not dispose of into sewer systems. Dispose of waste and containers according to local hazardous waste regulations.